Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2010 Pontiac G6- Video
Today on our 2010 Pontiac G6, we're going install part number 118439 from Tow Ready. First thing we need to do is get the vehicle ready to install our wire harness. To do that, we'll go ahead and open up the trunk and we also have to remove the tail lights. To do that, we have to get behind the fasteners behind the carpet. We'll go ahead and remove this tab point and pull the carpet out of the way. We have to remove this nut here with a 10 millimeter socket and this one down here as well. Now we can go ahead and pull back our tail light. more
12/18/2014 5:08:16 PM
Trailer Wiring Harness Installation - 2008 Pontiac G6- Video
Today on this 2008 Pontiac G6, were going to install part number 118439 from Tow Ready. All right to start off our install, we need to get inside a trunk area and remove the carpeting by the taillights. Once we get access to this taillight, we can go ahead and move the hardware forward taillights and then we can completely remove the taillights. Once we have our driver side taillight loose, well pull up on the tab located here so we can separate the electrical connector and then we can go ahead and remove the taillight. Were done with the driver side; lets repeat the same process over on the passenger side. Well go ahead and take our four pole wire and run down between the bumper cover and the body. more
2/15/2013 2:20:25 PM
Trailer Wiring Harness Installation - 2007 Pontiac G6- Video
Today on our 2007 Pontiac G6 well be installing the Tow Ready T1 Connector part number 118439. First, well need to access the rear cargo area. Well go ahead and open up the trunk and remove the cargo hooks here behind the drivers side taillight assembly. Then well go ahead and pull the carpeting back exposing the two 10-mm nuts that will need to be removed holding the taillight assembly in place. Now with those removed, we can go ahead and simply pop the taillight assembly free from its position and then remove the wiring connector going into the back of it. Next, well go ahead and repeat the same process on the passengers side. more
9/21/2012 2:04:43 PM
Filter Videos
Filter Videos
